SPA-500

Directions:

1. Shake the bottle well before adding.
2. Remove the filter from the system and clean it separately.
3. Turn on the Spa/Hot Tub circulation and jets.
4. Pour SPA-500 directly into the body of water (8oz. per 500 gallons of water).
5. Run system with all jets/pumps turned on for 5-10 minutes.
6. After 5-10 minutes, turn the system off for another 5-10 minutes.
7. After being off for 5-10 minutes, turn the whole system back on for another 5-10 minutes.
8. After 5-10 minutes of the whole system running, turn the system off and drain the water from the Spa/Hot Tub.
   1. While draining the spa, thoroughly rinse the shell and run a water hose through the skimmer/suction line.
9. After Spa/Hot Tub has been completely drained:
   1. Reinstall cleaned filter.
   2. Refill with fresh water.
   3. Adjust chemistry to Spa/Hot Tub manufacturer’s specifications. You can use the Orenda App to help with this.

More Orenda Products