Spa Purging

 

1. Add 4 oz. of CV-600 & SC-1000 per 500 gallons of water, and 2 oz. of PR 10000

a. This will clean pipes of unwanted oils and buildup.

2. Add 2 oz. of PR 10000

3. Run spa for 5 minutes with the CV-600 & PR 10000

a. This will cause the water to foam, this is alright.

4. Turn the spa off and let it rest for 15 minutes.

5. Turn the spa on for 10 minutes, then shut off.

6. Drain and hose down the spa.

7. Refill after completion

       Spa Maintenance

1. Use 1/2 oz. of CV-600 & SC 1000 per 500 gallons of water 3-5 times weekly.

a. If you notice excessive foaming with this amount, reduce amount until desired results appear.

2. Use 1oz. of PR 10000 per 500 gallons of water weekly.

 

Call Orenda Technologies, Inc. @ 1-866-763-4269 with any questions